Pedals

Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)

Get back on the road with original equipment pedals. GENUINE REPLACEMENT PARTS Keep your bike operating as it should. PRODUCT DETAILS - Dialed fit for kid sized feet - Sold in pairs

Our best flat pedal features replaceable traction pins and fully serviceable internals for lasting performance. - Dial in your preferred traction with tunable pin placement and contact height - Concave pedal body locks in foot placement for pedaling and descending - Durable axle spins on sealed cartridge bearings - Replaceable barbed traction pins - Pedal body is made from 6061-T6 aluminum - Install with 8mm hex wrench

Platform pedals with a durable nylon design and replaceable pins for consistent grip. - Durable nylon body with a proven shape for comfort and confidence - Virtual concave design with pin placement secures your shoe for pedaling and descending - Durable axle spins on sealed cartridge bearings - Replaceable steel traction pins - Install with 8mm hex wrench

This pedal set is perfect for the rider that needs ankle support in a completely secure pedal. It features a complete foot platform with a solid heel support. It also features 2 oversize straps with reflective strip and stainless steel ringlets that allow for a strong yet comfortable fit. A counterbalance on the bottom also assures the pedal will always remain upright for easier entry and exit. Perfect for special needs and motor control issues. Sold as a set of two. --Note: This pedal is not compatible with our Tandem Pro in the stoker position. The Tandem Pro captain position can utilize these pedals. - Replaces standard pedal - Counter-weighted so that the pedal is always in the same orientation - Reflective accents for visibility in low light conditions - One size fits most: for really small feet, consider our Pedal Platform w/straps kit

- One piece alloy body with rubber surface for grip - Chromoly spindle - 574g pair (9/16")

- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

- Wide pedal-to-shoe contact - Lower platform height for pedaling stability - Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-molly spindle with 8 mm hex wrench mount - Sealed mechanism - 1.0 mm cleat spacer included - Binding Dual sided - SM-SH51 Cleat included - Cleat retention adjuster - Integrated cage - Cartridge axle - Average weight: 438g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

PD-EH500 pedals FEATURE - One side SPD, the other side flat - Light action binding makes frequent stepping-in & out easier - Better grip on flat side for wet condition BENEFIT - Convenient road touring pedal - Optimized for urban riding - Multi-condition - Best match with CT or MT shoes

Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability. - 380 grams (pair)

Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding. - 310 grams (pair)

PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65

Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams

When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 328g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.

Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years

Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details - Optimal surface area - Minimal profile 16mm thin - 10 adjustable 8mm pins per side for grip - 10mm pins available for purchase here - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Serviceable, pedal refresh kit available Specs - Adjustable pins: 10 per side - Body Material: A380 Aluminum - Endcap: T15 - Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large) - Inner Bearing Type: Igus Bearing - Max Rider Weight: No restriction - Outer Bearing Type: Double Cartridge Bearing - Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large) - Spindle Material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 439g per pair (Small), 494g per pair (Large)

The Bontrager City Pedal Set delivers comfortable foot support and reliable traction to keep you confidently connected to your bike. It features reflective edges on the front and rear to add visibility in low-light conditions, and a strong, durable, and easily serviceable chromoly axle to keep you rolling smoothly ride after ride. - Nylon concave body supports and stabilizes foot while pedaling - Anti-slip texture for traction and confidence - Front and rear reflective panels add visibility in low-light conditions - Durable chromoly spindle with long- lasting, serviceable bearings - Installs with 6mm hex key or flat 15mm pedal wrench

Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs. - Weight: 224g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 39º - Bearing: Sealed

The exceptional comfort and versatility of the Speedplay Comp road pedal derive from its confidence-inspiring and stable platform, offering both value and performance mile after mile for cyclists of all levels. Precise engagement, effortless release, and dual-sided entry with the Easy Tension Cleat deliver ease of use and confidence to the rider. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Versatile performance defines the advanced Speedplay system. Utilizing this innovative platform, Comp's confident engagement and stable platform provide benefits to riders at every level. - Weight: 224g (per pedal pair) - Spindle Material: Chromoly - Spindle Length: 53mm - Float: 5 to 15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

The Speedplay Nano is a featherweight, dual-sided road pedal that lives up to the demands of sprint finishes, categorized climbs, and tough training sessions. The mix of premium titanium and carbon fiber materials creates a lightweight but strong pedal that will hold up and deliver speed on the breakaway. The integrated cleat system with 3-axis adjustability allows you to precisely dial in your fit for optimized biometrics and increased power transfer. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimze fit and enhance performace through better biomechanics. Designed with the same level of focus and dedication it takes to earn a spot on the podium, Nano is a purpose-built, ultralight pedal that utilizes the proven Speedplay platform to offer every advantage come race-day. - Weight: 168g (per pedal pair) - Spindle Material: Titanium - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

VP's Grind Pedals meet the needs of hard-core riders who want a slick and durable set of pedals, and they also work great for anyone who likes stable and comfortable platforms. The Grinds have versatile good looks and feature a thin profile, durable 1-piece nylon bodies with grip pins, boron-steel axles and oversize inboard bearings. - 380 grams - 9/16" axles

A durable, dual-sided, SPD-compatible MTB pedal with fully-adjustable release tension TAKE YOUR RIDING TO THE NEXT LEVEL Clip into the control and efficiency of clipless pedals. The Kovee Comp Clipless Pedals offer a fully adjustable release tension that lets you dial in the right feel for how you ride, while adding the confidence and control of clipless pedals. Perfect for riders new to clipless and those looking to secure a durable pair of clipless pedals without breaking the bank. PRODUCT DETAILS - Dual-sided, SPD-compatible XC MTB clipless pedals - Fully adjustable clip in & clip out tension - Durable die cast aluminum body - Dual sealed ball bearings with chromoly spindles for smooth spinning durability - Install direction & torque spec listed on spindle - Includes cleats and mounting hardware

Dual-sided, SPD-compatible clipless MTB pedals with a perfect balance between durability and weight CLIP INTO CONFIDENCE Clip into the control and efficiency of clipless pedals. The Kovee Elite Clipless Pedals offer fully adjustable release tension that lets you dial in the right feel for your ride, while adding the confidence and control of clipless pedals. When you're after a balance of weight, durability, and style, reach for Kovee Elite. PRODUCT DETAILS - Dual-sided, SPD-compatible XC MTB clipless pedals - Fully adjustable clip in & clip out tension - Durable forged body with anodized plates for added durability - Dual sealed ball bearings with chromoly spindles for smooth spinning durability - Install direction & torque spec listed on spindle - Includes cleats and mounting hardware

Dual-sided, SPD-compatible clipless MTB pedals with lightweight composite body for the fastest racers CLIP INTO SPEED With a lightweight composite body to help you fly up the hills, Kovee Pro Clipless Pedals deliver the control, confidence, and efficiency you crave from pedals. When weight and efficiency matters most, reach for Kovee Pro. PRODUCT DETAILS - Dual-sided, SPD-compatible XC MTB clipless pedals - Fully adjustable clip in & clip out tension - Lightweight composite body with knurling for added grip - Dual sealed ball bearings with chromoly spindles for smooth spinning durability - Install direction & torque spec listed on spindle - Includes cleats and mounting hardware

Dual-sided, SPD-compatible clipless MTB pedals have trail-worthy durability with the efficiency of clipless CLIP INTO CONFIDENCE ON THE TRAIL The Line Comp Clipless Pedals have a durable diecast aluminum cage to protect from rock strikes and give a confidence-inspiring platform for easily clipping in, all while quickly clearing mud and debris. These pedals are best for you if you want serious clipless trail pedals that don't break the bank. PRODUCT DETAILS - Dual-sided SPD-compatible trail MTB clipless pedals - Fully adjustable clip in & clip out tension - Durable die cast aluminum body & cage to protect against rock strikes - The cage on trail pedals provides a platform for easily clipping in - Dual sealed ball bearings with chromoly spindles for smooth spinning durability - Install direction & torque spec listed on spindle - Includes cleats and mounting hardware

Versatile flat pedals with a durable nylon body and forgiving traction tread that delivers consistent, confident grip. Confident and durable The versatile Line Comp Flat Pedal is built from durable nylon for a solid platform with integrated traction, so every time you place your foot on your pedal your shoe stays put. Line Comp is strong enough to use on your mountain bike, but also at home on your city or commuter bike. A durable frame and solid axle with dual bushings ensure lasting performance. PRODUCT DETAILS - Durable nylon body with a proven shape for comfort and confidence - Sturdy axle boosts durability and spins smoothly on dual bushings - Nylon traction pins provide forgiving, confident traction - Simple to install with either 6mm hex or standard 15mm pedal wrench

Clip into confidence on the trail The Line Elite Clipless Pedals have a durable forged aluminum cage to protect from rock strikes and give a confidence inspiring platform for easily clipping in, all while quickly clearing mud and debris. The anodized plates add a stylish astethic and extra durability. These pedals are best for you if you want upgraded clipless trail pedals designed for durability and performance on every ride. Product details - Dual-sided SPD-compatible trail MTB clipless pedals - Fully adjustable clip in & clip out tension - Durable forged body with anodized plates for added durability & cage to protect against rock strikes - The cage on trail pedals provides a platform for easily clipping in - Dual sealed ball bearings with chromoly spindles for smooth spinning durability - Install direction & torque spec listed on spindle - Includes cleats and mounting hardware