Recumbent

TerraTrike's 10t Deluxe Idler is designed for quiet operation and uniform wear (original polyurethane version could flat-spot). Long-wearing black Delrin material with pre-installed sealed bearing. - 54mm OD, 8mm ID (bearing ID), 15mm wide - Standard OD for easy retrofit on older trikes with single or double slotted idlers - If you have a double slotted rear idler you will need two of these plus a spacer for replacement - OEM replacement part

TerraTrike's 13t Deluxe Idler is designed for quiet operation and uniform wear. Long-wearing black Delrin material with pre-installed sealed bearing. - 63.5mm OD, 8mm ID (bearing ID), 15mm width - The larger OD of this idler may not fit older trikes or newer trikes in some locations - (best bet: replace your old idlers with the same OD replacement idler) - OEM replacement part

Adding a 24" rear wheel to your trike gives you some increase in speed and smooths out bumps without taking away all of your climbing ability. Besides adding a very cool look to your trike, we think the 24" rear wheel is an ideal setup for many riders looking for the next step up in performance. Does not include cassette. - TerraTrike branded 24" rear wheel kit - Includes Schwalbe Marathon tire, tube and rim strip - Strong and reliable double-wall rim - Sealed bearing rear hub with high quality Japanese bearings - Shimano 8, 9, 10 speed compatible - Black hub shell, black rim and black spokes

One of our most popular trike upgrades, adding a 26" rear wheel to your trike gives you plenty of advantages, and looks pretty cool too! The larger wheel allows for greater maximum speeds (by increasing the gear inches). It also makes for a smoother ride, eliminating some of the road noise felt on rough bike paths or gravel roads. The 26" rear wheel works best for those who ride mostly bike paths or roads with a moderate amount of hill climbing. Use on the Tour II requires a Dropout Extension. Does not include cassette. - TerraTrike branded 26" rear wheel kit - Includes Schwalbe Road Cruiser tire, tube and rim strip - Strong and reliable single-wall rim - Sealed bearing rear hub with high quality Japanese bearings - Shimano 8, 9, 10 speed compatible - Silver hub shell, silver rim and silver spokes

Why sacrifice comfort and performance when a TerraTrike is shared amongst multiple riders? Use the Chain Gobbler 2 to adjust your trikes boom length to the perfect fit within seconds and without tools. This kit includes brackets, chain idlers, quick-release levers, and all other hardware needed. - Easily takes up or pays out chain - Allows for boom adjustment anywhere from large to small - Fits all Rambler and GT models

The TerraTrike Comfort Pedal Conversion Kit is a great safety addition for your trike. Providing a comfortable foot support solution, they also allow for hands free entry. Specifically designed for recumbent trikes they are easily adjustable. - One pair is included in the kit. - Pedals not included - mounts to standard TerraTrike pedals. - One size fits most. - Convert standard pedals to pedals with heel support straps - Securely holds heel of foot when going over bumps - Fits TerraTrike and many other standard pedals - Easy sizing with straps

This dual control brake lever, which is a single lever that actuates both brakes, allows for a single hand control setup and eliminates brake steer. Professional installation recommended. - Control both brakes with one brake lever - For left handlebar - Compatible with all TerraTrike models and many others

This pedal set is perfect for the rider that needs ankle support in a completely secure pedal. It features a complete foot platform with a solid heel support. It also features 2 oversize straps with reflective strip and stainless steel ringlets that allow for a strong yet comfortable fit. A counterbalance on the bottom also assures the pedal will always remain upright for easier entry and exit. Perfect for special needs and motor control issues. Sold as a set of two. --Note: This pedal is not compatible with our Tandem Pro in the stoker position. The Tandem Pro captain position can utilize these pedals. - Replaces standard pedal - Counter-weighted so that the pedal is always in the same orientation - Reflective accents for visibility in low light conditions - One size fits most: for really small feet, consider our Pedal Platform w/straps kit

For use with idlers, the L Mounting Bracket ensures the chain stays engaged on the idler. - L bracket for idlers - Fits various models in various locations - For use with 10T or 13T idlers - Aluminum, black anodized finish - OEM replacement part

This Promax brake lever set includes a locking brake lever for BOTH brakes. Used as a parking brake, just press the button and you won't have to worry about your trike rolling away. No more fiddling with a Velcro strap to keep the brake engaged. These are the same OEM equipped brakes you will find standard on most current trike models. To set the parking brake, just squeeze the brake lever, press the button and release the lever. To disengage, simply squeeze the brake lever again and the locking button releases. - Locking brake lever pair (left and right) - Works with any mechanical disc or linear pull brakes

Eliminate noise and never lose your seat stay pins again with this pair of locking style pins. Great upgrade on any TerraTrike (not compatible with Edge). OEM replacement part.

Secure your Low Rider Rack with these trike specific mounting kits. Sold separately from the Low Rider Rack. - Fit Kit for Low Rider Rack - Fits: Rambler, Maverick, Rogue, and Traveler models - Includes all hardware for mounting Low Rider Rack

Secure your Low Rider Rack with these trike specific mounting kits. Sold separately from the Low Rider Rack. - Fit Kit for Low Rider Rack - Fits: Rover - Includes all hardware for mounting Low Rider Rack to Rover trikes

Secure your Low Rider Rack with these trike specific mounting kits. Sold separately from the Low Rider Rack. - Fit Kit for Low Rider Rack - Fits: Sportster - Includes all hardware for mounting Low Rider Rack to Sportster trikes

TerraTrike's Pedal Platform with Straps provides secure attachment of the rider's feet to the pedals, improving safety and efficiency when riding trikes. The Pedal Platform with Straps is adjustable and lets riders wear regular footwear - no specialty shoes are required. Once installed on the standard nylon TerraTrike pedals, simply adjust the platform for shoe size and strap in. Will fit youth sizes depending on shoe style up to Men's 13. Pedals not included. Sold as a left/right pair. - Bolts directly to our standard pedals after removing the reflectors - Adjustable for most sizes of feet - Reflective accents for visibility in low light conditions - Less bulky than our Heel Support Pedal - Durable black powder coated finish

The Seat Extender will allow for taller customers to now enjoy any TerraTrike that features the two-position fixed seat mount. - Heavy duty chromoly construction - Durable black powder coated finish - Use of the Seat Extender limits the weight capacity of any TerraTrike to 320 lbs. - Use of the Seat Extender will slightly reduce the foldability of the Traveler and may cause damage to the paint and frame.

This seat mesh is specific for TerraTrike models with extended seat pan, such as the Gran Tourismo. The breathable mesh wicks moisture and maintains comfort. Plus this mesh includes a zippered pocket for small tools like a hex key for your seat or an extra dollar or ten for snacks on the road! The adjustable straps can be used to dial in comfort. - OEM replacement part